MetroLED is a versatile lighting system used for illuminating precious objects and artefacts within the museum, gallery and retail sectors. It has been designed with ease of use and maintainability in mind, and is now available in kit format for those who require a quick and effective means of illumination.
Our gantry kit is ideally suited for use in display cabinets and cases thanks to the versatility that it offers. It comes with a LED linear light bar that provides a wash of light across the area that it is illuminating below. The light bar is available in a choice of colour temperatures and can rotate up to 350°, allowing you to direct the light where it is needed most.
The gantry can be supplied in a range of widths to suit all manner of display cases and includes a power cable and mounting feet for hassle free installation. Dimming functionality is also available and should be specified when placing an order.
All of our MetroLED components were designed to be extremely simple to install and operate, and the gantry system is no exception.
Simply mark and drill 2 x 25mm holes in the mounting surface and drop the gantry through. Be aware that only 1 of the gantry legs has a power track inside, so position this leg closest to your power source. The power leg will be marked so you know which it is.
Working underneath the surface, tighten the supplied half nuts onto the mounting feet to secure the gantry in place.
Plug the power in connector in to the leg which carries power and switch the mains power switch on to illuminate the gantry.
|Total Length||Max. Height||Power Supply||Order Code (3000K)||Order Code (4000K)|
100-240V AC, 50-60Hz
2.1 x 5.5 x 12mm
Oslon, white light
3000K or 4000K
50,000 hours in ambient 25°C