MONOLED
DESIGNED AND MANUFACTURED BY UFO
LED Gantry Lighting System
CONTACT US TO DISCUSS YOUR PROJECT| MONOLED GANTRY / TECHNICAL INFORMATION | |
|---|---|
| Available Colour Temperatures | 2700K, 3000K or 4000K |
| No. of LEDs | 182 LEDs per metre |
| CRI | 97CRI |
| Lumen Output | 950lm per metre |
| Track Supply Voltage (CV) | 24V DC |
| Power Consumption | 14.4W per metre |
| Beam Angle | 100° |
| Mounting Options | Surface mount (secured with screws) round or corner versions Recessed (secured with back nut) round version Recessed (secured with screws) round or corner versions |
| Available Heights | Standard heights can vary between 250mm and 1000mm with custom heights to order. Note that higher heights may require additional support. |
| Available Overall Lengths | 258mm minimum to 2568mm maximum in 38.5mm increments. Note that depending on install conditions, longer lengths may require a centre support. |
| Lit Length | Lit length is always 124mm less than overall length |
| Material | Aluminium |
| Available Finishes | Black |
| MONOLED GANTRY / DRIVER OPTIONS | |
|---|---|
| 24V Driver Options | Standard with no control options Manual dimming Casambi Bluetooth dimming Eulum Xicato enabled Bluetooth Dali dimming 0-10V dimming |
A choice of 3 different styles of recessed mounting feet for use in gantry systems or for vertical stalks.
Styles available: round flange with threaded back, round flange with screw down fixings or corner flange with screw down fixings. Only flange is visible above mounting surface - body of foot is hidden underneath.
Manufactured from aluminium and finished in black
A choice of 2 different styles of surface mount feet for use in gantry systems or for vertical stalks.
Styles available: round flange or corner flange with screw down fixings. Surface mounted, so whole foot is visible. Grub screws used to secure MetroLED extrusion within foot.
Manufactured from aluminium and finished in black