UFO Lighting - Pill Lights

PILL

DESIGNED AND MANUFACTURED BY UFO

Decorative & Functional Floor Lighting

PILL

DESIGNED AND MANUFACTURED BY UFO

Decorative & Functional Floor Lighting

PILL

DESIGNED AND MANUFACTURED BY UFO

Decorative & Functional Floor Lighting

PILL

DESIGNED AND MANUFACTURED BY UFO

Decorative & Functional Floor Lighting

Pill Lights

UFO Pill lights, with an inner core of PMMA fibre have been successfully used as decorative floor lighting in a number of entertainment venues - from cruise ships to high end hotels.

Manufactured from aluminium, the pill light bodies are painted white and fitted with glands at either end. PMMA fibre is fed in through one one gland and through a protective acrylic tube. The gland on the other end is used to hold a mirror which reflects the light from the fibre to increase the brightness of the light.

The Pill lights are then filled with Electrolube UR5635 resin which both hides the fibre inside the body and provides a diffusing effect. The resin finish sits proud of the body by 2mm. During installation, the pill lights are fixed to the floor using the 2 mounting holes. The surrounding floor is then poured up to the level of the resin.

The result is well defined Pill shaped decorative or functional marker light, which is perfectly level with the surrounding floor, and is robust enough to be used in walk over situations.

Specifications

Item	Specification
Pill Body Material	Aluminium
Pill Body Finish	White as standard
Fibre	21 strand PMMA
Gland Size	M10
Available Sizes (see drawings)	100mm, 200mm or 300mm
Mounting Method	M4 CSK screws x 2
Inner Tube	Clear acrylic
Resin Type	Electrolube UR5636

Item

Specification

Pill Body Material

Aluminium

Pill Body Finish

White as standard

Fibre

21 strand PMMA

Gland Size

M10

Available Sizes (see drawings)

100mm, 200mm or 300mm

Mounting Method

M4 CSK screws x 2

Inner Tube

Clear acrylic

Resin Type

Electrolube UR5636

Electrolube UR5635

UR5635 is a two-part, semi-rigid polyurethane resin formulated with a 'hazy/cloudy' appearance. The product is ideal for use in protective applications, particularly for dispersing light. Due to a carefully selected blend of components an extremely durable, low viscosity system is achieved which can be used for a wide variety of applications.

• Hazy/cloudy white translucent appearance; ideal for dispersing light

• 1:1 by volume mix ratio; aids ease of processing

• Does not contain IPDI; low hazard material

• High resistance to weather/UV, acids and alkalis, water and mould growth; suitable for a range of environments

Resin Cured Properties

Item	Specification
Thermal Conductivity (W/m.K)	0.30
Cured Density (g/ml)	1.10
Temperature Range (°C)	40 to +120
Dielectric Strength (kV/mm)	11
Volume Resistivity (ohmcm)	10¹⁴
Shore Hardness	A80
Colour (Mixed System)	Hazy/Cloudy White
Flame Retardancy	No
Loss Tangent @ 50 Hz	0.025
Permittivity @ 50 Hz	3.50
Elongation At Break	62.4%
Water Absorption (9.7mm thick disk, 51mm diameter) 10 days @ 20°C / 1 hour @ 100°C	<1% / <1%

Item

Specification

Thermal Conductivity (W/m.K)

0.30

Cured Density (g/ml)

1.10

Temperature Range (°C)

40 to +120

Dielectric Strength (kV/mm)

Volume Resistivity (ohmcm)

10¹⁴

Shore Hardness

A80

Colour (Mixed System)

Hazy/Cloudy White

Flame Retardancy

Loss Tangent @ 50 Hz

0.025

Permittivity @ 50 Hz

3.50

Elongation At Break

62.4%

Water Absorption (9.7mm thick disk, 51mm diameter) 10 days @ 20°C / 1 hour @ 100°C

<1% / <1%

Fibre Optic Fittings

Pill Lights

UFO Pill lights, with an inner core of PMMA fibre have been successfully used as decorative floor lighting in a number of entertainment venues - from cruise ships to high end hotels.

The result is well defined Pill shaped decorative or functional marker light, which is perfectly level with the surrounding floor, and is robust enough to be used in walk over situations.

Specifications

Electrolube UR5635

Resin Cured Properties

100mm Pill Overview

200mm Pill Overview

300mm Pill Overview