Quick Contact Details
Social media
Contact information
UK Head Office

Home Place, Coldstream, TD12 4DT, UK




+44 (0)1890 883416

USA Office

6119A Clark Center Avenue, Sarasota, FL34238, USA





German Office

Raum 2.38, Friendsfactory AG, Gutenberstraße 1, Munchen 85737, Germany





Cabinet Lighting Kit with LD3 LED Fitting

Kit Overview

Our LD3 LED lighting kits offer a quick and easy solution for lighting cabinets and display cases of all shapes and sizes.

This kit comes with a choice of colour temperatures, high colour rendition and narrow, medium and wide beam options to suit varying requirements.

Also included is a driver unit which allows you to control the overall dimming level of the lighting via a potentiometer which can be mounted in a standard 1 gang pattress box, a splitter box and 2.5 metres of cable for each fitting.

Whether you want to gently wash the interior of a cabinet or highlight specific areas or niches, it is achievable with the LD3.

Easy Installation

The LD3 fitting is easily installed in a variety of mounting surfaces and is held in place with two retaining springs which are not visible once the fitting is installed.

The fitting requires a 48mm cutout in the mounting surface.

Once the holes are cut, you simply push the fittings into place, and the robust securing springs will snap into place. You then just connect their power cables to the splitter box and switch on.

Ordering Codes

No. of Fittings Bezel Colour Ordering Code
4 x LD3 Black CLED-LD3-4B+[colour temperature]+[lens][1]
4 x LD3 Silver CLED-LD3-4S+[colour temperature]+[lens][1]
6 x LD3 Black CLED-LD3-6B+[colour temperature]+[lens][1]
6 x LD3 Silver CLED-LD3-6S+[colour temperature]+[lens][1]
8 x LD3 Black CLED-LD3-8B+[colour temperature]+[lens][1]
8 x LD3 Silver CLED-LD3-8S+[colour temperature]+[lens][1]
10 x LD3 Black CLED-LD3-10B+[colour temperature]+[lens][1]
10 x LD3 Silver CLED-LD3-10S+[colour temperature]+[lens][1]
12 x LD3 Black CLED-LD3-12B+[colour temperature]+[lens][1]
12 x LD3 Silver CLED-LD3-12S+[colour temperature]+[lens][1]
[1] Add colour temperature and lens type to end of code (3K - 3000K / 4K - 4000K) and (WD - wide / ME - medium / NA - narrow). E.G. CLED-LD3-4B-3K-WD

The LD3 Fitting


The LD3 downlight utilises a Cree LED, but unlike the LD1 and LD2, it carries the added benefit of being adjustable. The versatile fitting, which can tilt up to 27°, comes with a choice of narrow, medium and wide beam options to allow you to direct the light exactly where it is needed.

Available in a choice of two colour temperatures with a high colour rendition and multiple methods of dimming, the aluminium fitting is ideally suited for indoor use in residential and architectural sectors amongst others.

The downlight features a thin bezel of 54mm in diameter and can be supplied in a range of finishes and colours to complement almost any décor. Featuring a spring clip mounting system and narrow recess depth of 31mm, the LD3 can easily and quickly be installed in the shallowest of spaces.

ld3 image and cad

Technical Specifications

Light source


Colour temperatures & CRI

3000K: 98 CRI (typical)
4000K: 96 CRI (typical)

Power consumption

1.12W per fitting, not inc. driver


3.2v (nominal)

Typical luminous flux (based on 19° lens)

3000K: 65lm/W
4000K: 72lm/W


Local potentiometer dimming


13.5° / 19° / 28°

LED life

50,000 hours

Material & finishes

Aluminium. Black body with black or silver coloured bezel