Our LD5 LED lighting kits offer a quick and easy solution for lighting cabinets and display cases of all shapes and sizes.
This kit features our best selling LD5 fitting which is fitted with an adjustable trumpet allowing the light to be directed exactly where it is needed.
Also included is a driver unit which allows you to control the overall dimming level of the lighting via a potentiometer which can be mounted in a standard 1 gang pattress box, a splitter box and 2.5 metres of cable for each fitting.
The LD5 fitting is easily installed in a variety of mounting surfaces and is held in place with a supplied retaining nut which is not visible once the fitting is installed.
The fitting requires a 34mm cutout in the mounting surface.
Once the holes are cut, you simply push the fittings into place, secure with their retaining nut and connect their power cables to the splitter box and switch on.
|No. of Fittings||Bezel Colour||Ordering Code|
|4 x LD5||Black||CLED-LD5-4B+[colour temperature]|
|4 x LD5||Silver||CLED-LD5-4S+[colour temperature]|
|6 x LD5||Black||CLED-LD5-6B+[colour temperature]|
|6 x LD5||Silver||CLED-LD5-6S+[colour temperature]|
|8 x LD5||Black||CLED-LD5-8B+[colour temperature]|
|8 x LD5||Silver||CLED-LD5-8S+[colour temperature]|
|10 x LD5||Black||CLED-LD5-10B+[colour temperature]|
|10 x LD5||Silver||CLED-LD5-10S+[colour temperature]|
|12 x LD5||Black||CLED-LD5-12B+[colour temperature]|
|12 x LD5||Silver||CLED-LD5-12S+[colour temperature]|
Supplied with a warm white or neutral white LED light and a CRI of >95 that ensures colours are shown in their true light, the LD5 is particularly useful for illuminating static objects within display cabinets and fixtures due to its adjustable nature.
Integral to the front of the fitting is a slim snoot that can tilt up to 35°, allowing you to focus a concentrated beam of light in almost any direction required, whilst reducing glare from the LED.
In addition to be being installed in ceilings, the aluminium fitting is also suitable for mounting in the base of display cabinets and projecting light upwards. It is supplied with a back nut to allow for secure installation in a recess and can be finished in either black or silver to match your display cabinet or décor requirements.
3000K: 98 CRI
4000K: 97 CRI
1.12W per fitting, not inc. driver
2.75V (min.), 3.2V (typ), 3.5V (max.)
Local potentiometer dimming - 0 to 100%
Aluminium, finished in black or silver
Supplied with backnut, 32mm cut out required