Consisting of mixed diameter fibre for a 'near and far' effect, each fibre optic star kit comes with small polycarbonate fittings for a neat finish in the ceiling or chosen installation material.
Unlike other systems on the market, these fittings allow for the fibre to pass all the way through, thus maintaining the preferred intense star effect which is only achieved when the fibre end is exposed, whilst also covering up any ragged edges from drilling.
If you prefer, you can of course also just use the bare fibres on their own.
Product | No. of fibre tails | Fibre tail lengths | Light source options | Ordering Codes |
---|---|---|---|---|
SS112 | 112 mixed diameter (0.75 & 1mm) | Range from 1.25m to 2.0m | MicroLED 100 / MicroLED 1000 / MicroLED 4000 | SS112-ML100 / SS112-ML1000 / SS112-ML4000 |
SS112+1 | 112 mixed diameter (0.75 & 1mm) | Range from 2.25m to 3.0m | MicroLED 100 / MicroLED 1000 / MicroLED 4000 | SS112+1-ML100 / SS112+1-ML1000 / SS112+1-ML4000 |
MS168 | 168 mixed diameter (0.75 & 1mm) | Range from 2.0m to 3.0m | MicroLED 100 / MicroLED 1000 / MicroLED 4000 | MS168-ML100 / MS168-ML1000 / MS168-ML4000 |
LS224 | 224 mixed diameter (0.75 & 1mm) | Range from 1.0m to 4.5m | MicroLED 100 / MicroLED 1000 / MicroLED 4000 | LS224-ML100 / LS224-ML1000 / LS224-ML4000 |
XLS336 | 336 mixed diameter (0.75 & 1mm) | Range from 2.0m to 7.5m | MicroLED 100 / MicroLED 1000 / MicroLED 4000 | XLS336-ML100 / XLS336-ML1000 / XLS336-ML4000 |