monoled main image

MONOLED

DESIGNED AND MANUFACTURED BY UFO

LED Gantry Lighting System

CONTACT US TO DISCUSS YOUR PROJECT

LED Track Lighting

A linear gantry system which uses diffused LED tape to provide a bright wash of light suitable for all display applications.

MonoLED offers multiple colour temperatures, a high CRI and clean, crisp illumination.

Overview

The UFO MonoLED Gantry features a sleek 20mm diameter main body and is fitted with two legs of the same size.
There are two mounting options with the gantry system; screw-down feet or a back nut. The screw-down feet are simply screwed into the mounting surface, the back nut system is great for concealing the mounting method beneath the mounting surface.
Standard heights can vary between 250mm and 1000mm. Higher heights can be supplied but additional support may be required - please enquire about your specific requirements.
Available main body lengths start at 258mm, with the lit length being 134mm. The overall length can be increased in 38.5mm increments upto a maximum of 2568mm. The lit length is always 124mm shorter than the overall length.
MONOLED GANTRY / TECHNICAL INFORMATION
Available Colour Temperatures2700K, 3000K or 4000K
No. of LEDs182 LEDs per metre
CRI97CRI
Lumen Output950lm per metre
Track Supply Voltage (CV)24V DC
Power Consumption14.4W per metre
Beam Angle100°
Mounting OptionsSurface mount (secured with screws) round or corner versions
Recessed (secured with back nut) round version
Recessed (secured with screws) round or corner versions
Available HeightsStandard heights can vary between 250mm and 1000mm with custom heights to order. Note that higher heights may require additional support.
Available Overall Lengths258mm minimum to 2568mm maximum in 38.5mm increments. Note that depending on install conditions, longer lengths may require a centre support.
Lit LengthLit length is always 124mm less than overall length
MaterialAluminium
Available FinishesBlack
MONOLED GANTRY / DRIVER OPTIONS
24V Driver OptionsStandard with no control options
Manual dimming
Casambi Bluetooth dimming
Eulum Xicato enabled Bluetooth
Dali dimming
0-10V dimming

Mounting Options

Recessed Mounting Feet

A choice of 3 different styles of recessed mounting feet for use in gantry systems or for vertical stalks.

Product Information:

Styles available: round flange with threaded back, round flange with screw down fixings or corner flange with screw down fixings. Only flange is visible above mounting surface - body of foot is hidden underneath.

Manufactured from aluminium and finished in black

monoled mounting feet
monoled mounting feet

Surface Mount Feet

A choice of 2 different styles of surface mount feet for use in gantry systems or for vertical stalks.

Product Information:

Styles available: round flange or corner flange with screw down fixings. Surface mounted, so whole foot is visible. Grub screws used to secure MetroLED extrusion within foot.

Manufactured from aluminium and finished in black

monoled mounting feet
monoled mounting feet