A very powerful RGBW fibre optic light source utilising LED technology. Features full IP67 ingress protection and powered by an external 24V DC power supply unit.
Utilising industry standard DMX to control the unit's colour change effects, plus the option of adding a twinkle wheel and an RF remote control, this is the ultimate light source for powering decorative fibre optic effect lighting.
A 50,000 hour lamp life and cool quiet running ensure that maintenance costs are reduced to almost nil.
Fitted with a standard 30mm fibre port connector, this light source is suitable for both new installations and retro-fitting to existing fibre optic installations.
Please note that although this light source is fully IP67 rated and can be used in wet/outdoor areas, it is not suitable for submersion in water and it should not be buried underground.
Sea Water & Saline
Please be aware that UFO will not specify, supply or install this light source for use in any area where corrosion or damage from saline may occur. This includes near the sea, on ships or in any other areas where the light source would be in an unprotected area. Damage caused by salt water due to improper, unprotected siting of the light source will void any and all UFO warranties on the product. UFO strongly recommend that the light source is not installed in any location where such damage may occur.
GENERAL INFORMATION
Port Connector Size
30mm diameter
Fibre Type
Glass / PMMA
Material / Finish
Hard anodised aluminium
Dimensions (L x W x H)
222mm x 240mm x 163mm
Weight
4.44kg
Operating Environment
Outdoor use - IP67 It is imperative that a gap of 200mm (8") is left around the unit. This is to allow air to circulate and prevent overheating. The location must have free ventilation and must not have an ambient temperature higher than that specified for the unit.
Min. Ambient Temperature
-10°
Max. Ambient Temperature
50°
LIGHTING & CONTROL INFORMATION
Control Functionality
DMX & manual dimming
DMX Functionality
User addressable to 512
DMX Channels
6 channels
Colour Change Functionality
DMX, manual & remote control
Effects Wheels Options & Functionality
Twinkle wheel controlled by DMX or manual operation
LED ARRAY DATA
LED Array Type
Custom RGBW array
LED Array Power
46W
LED Array Model
Luxeon 36 LED Array
LED Array Life (L70, B10)
50,000 hours @ 25°C
White Colour Temperature Options
6500K (standard) / 4000K / 3000K
ELECTRICAL CHARACTERISTICS
Supply Voltage
90-264Vac
Mains Running Current
0.2A @240Vac
Mains Voltage VA Rating
50VA
External PSU Type
Meanwell, 24VDC, IP67, Type HL Driver
Motor Type
Rotalink 25C13/YS0LPSL3E 12V 60:1
Fan Type
ebm-papst, 80mm, IP68, 32dBA
RF REMOTE CHARACTERISTICS
RF Remote Frequency
2.4GHz
RF Remote Range
30m, depending on environment
RF Remote Power
2 x AAA batteries (supplied)
CONFIGURATIONS
Click the option buttons below to create the fitting model number
MODEL TYPE
COLOUR TEMP
EFFECT
REMOTE CONTROL
SENSOR
Model Number:
For the configuration of a twinkle wheel with sensor, the wheel is supplied with a cut out segment. The wheel in motion will give an uninterrupted twinkle by rotating backwards and forwards either side of the segment. When stop is selected the wheel will come to rest at the segment giving unobstructed white light output.
UFO USA Website 
UFO Licht Website 
