ionic 1

STEM

DESIGNED AND MANUFACTURED BY UFO

Discrete lighting with multiple control options.

CONTACT US TO DISCUSS YOUR PROJECT

ionic 1

STEM

DESIGNED AND MANUFACTURED BY UFO

Three different mounting methods and various configurations.

CONTACT US TO DISCUSS YOUR PROJECT

ionic 1

STEM

DESIGNED AND MANUFACTURED BY UFO

High CRI output & a choice of colour temperatures.

CONTACT US TO DISCUSS YOUR PROJECT

LED Lighting

A range of sleek and unobtrusive LED lighting systems which can be configured with either 1, 2 or 3 lighting heads.

The lighting heads offer independent freedom of movement, and a choice of beam angles and colour temperatures, for the ultimate in flexibilty.

Available in either striking black or soft anodised silver finishes, these lights will blend seamlesly into their surroundings and display your products or exhibits in the way they deserve to be shown.

Stem:Removable One

Stem:Removable Two

Stem:Removable Three

The Stem:Removable is available in 1, 2 or 3 head configurations and features a range of colour temperatures, control options, optics and snoot types. It is also available in 2 anodised finishes - silver or black.

Each fixture in this range can be individually removed from its power base and be replaced with a blanking cap to maintain the power continuity between the remaining stems.

Note that these fittings cannot be hot-plugged - power must be switched off before plugging in or removing a stem otherwise damage may occur.

GENERAL INFORMATION
Overall Stem Height	Stem:Removable One - 100mm Stem:Removable Two - 150mm Stem:Removable Three - 200mm Custom heights are also available but are subject to extra cost and extended lead times - contact us for more information.
Operating Environment	Indoor use only
IP Rating	IP20
Material	Aluminium
Available Finishes	Black or Silver Anodised
Securing Method	Secured to surface with screws.

OPTICAL DATA
Available Optics	16° / 23° / 36° / 45° x 20° / 20° x 50° / 61° / 80°

LED ARRAY DATA
LED Type	Osram Oslon Square on 9.5mm diameter PCB
LED Life (L70, B10)	>54,000 hours
Fitting Drive Current	~350 mA
Power Consumption	1.6W per head
Colour Temperature Options	2700K / 3000K / 4000K
CRI	>95
Lumen Output	54lm
LED Luminous Efficacy	98lm/W
Fitting Luminous Efficacy	72lm/W

ARTICULATION
Rotation	360°
Tilt	77°

DRIVER DIMMING OPTIONS
Driver Specific	No Dimming 0-10V DALI DMX Mains Local Potentiometer Dimming Remote Potentiometer Dimming

ACCESSORIES
Standard Snoot	19mm long x ⌀16mm straight snoot
Extended Snoot	24mm long x ⌀16mm straight snoot
Directional Snoot	30mm long x ⌀16mm slash-cut snoot
Honeycomb	Honeycomb diffuser which can be fitted to any snoot option

Note that the drawings above show the standard snoot option.

Product Datasheet

ORDERING CODES	Click grey buttons to configure

Model Type

Colour Temp

Optics

Colour

Snoot

Honeycomb

Model Number:

Stem:Fixed One

Stem:Fixed Two

Stem:Fixed Three

The Stem:Fixed is available in 1, 2 or 3 head configurations and features a range of colour temperatures, control options, optics and snoot types. It is also available in 2 anodised finishes - silver or black.

The fixtures in this range are fixed in place and cannot be removed without disconnecting directly from the driver. A decorative cover is included with each fitting to hide the fixing hardware.

GENERAL INFORMATION
Overall Stem Height	Stem:Fixed One - 92mm Stem:Fixed Two - 142mm Stem:Fixed Three - 192mm Custom heights are also available but are subject to extra cost and extended lead times - contact us for more information.
Operating Environment	Indoor use only
IP Rating	IP20
Material	Aluminium
Available Finishes	Black or Silver Anodised
Securing Method	Secured to surface with screws.

OPTICAL DATA
Available Optics	16° / 23° / 36° / 45° x 20° / 20° x 50° / 61° / 80°

LED ARRAY DATA
LED Type	Osram Oslon Square on 9.5mm diameter PCB
LED Life (L70, B10)	>54,000 hours
Fitting Drive Current	~350 mA
Power Consumption	1.6W per head
Colour Temperature Options	2700K / 3000K / 4000K
CRI	>95
Lumen Output	54lm
LED Luminous Efficacy	98lm/W
Fitting Luminous Efficacy	72lm/W

ARTICULATION
Rotation	360°
Tilt	77°

DRIVER DIMMING OPTIONS
Driver Specific	No Dimming 0-10V DALI DMX Mains Local Potentiometer Dimming Remote Potentiometer Dimming

ACCESSORIES
Standard Snoot	19mm long x ⌀16mm straight snoot
Extended Snoot	24mm long x ⌀16mm straight snoot
Directional Snoot	30mm long x ⌀16mm slash-cut snoot
Honeycomb	Honeycomb diffuser which can be fitted to any snoot option

Note that the drawings above show the standard snoot option.

Product Datasheet

ORDERING CODES	Click grey buttons to configure

Model Type

Colour Temp

Optics

Colour

Snoot

Honeycomb

Model Number:

Stem:Telescopic One

Stem:Telescopic Two

The Stem:Telescopic is available in 1 or 2 head configurations and features a range of colour temperatures, control options, optics and snoot types. It is also available in 2 anodised finishes - silver or black.

The fixtures in this range are fixed in place and cannot be removed without disconnecting directly from the driver. They feature a telescopic main stem whcih allows the height of the light heads to be easily adjusted. A decorative cover is included with each fitting to hide the fixing hardware.

GENERAL INFORMATION
Stem Height Range	Stem:Telescopic One - 200mm to 250mm range Stem:Telescopic Two - 200mm to 300mm range Custom heights are also available but are subject to extra cost and extended lead times - contact us for more information.
Operating Environment	Indoor use only
IP Rating	IP20
Material	Aluminium
Available Finishes	Black or Silver Anodised
Securing Method	Secured to surface with screws.

OPTICAL DATA
Available Optics	16° / 23° / 36° / 45° x 20° / 20° x 50° / 61° / 80°

LED ARRAY DATA
LED Type	Osram Oslon Square on 9.5mm diameter PCB
LED Life (L70, B10)	>54,000 hours
Fitting Drive Current	~350 mA
Power Consumption	1.6W per head
Colour Temperature Options	2700K / 3000K / 4000K
CRI	>95
Lumen Output	54lm
LED Luminous Efficacy	98lm/W
Fitting Luminous Efficacy	72lm/W

ARTICULATION
Rotation	360°
Tilt	77°

DRIVER DIMMING OPTIONS
Driver Specific	No Dimming 0-10V DALI DMX Mains Local Potentiometer Dimming Remote Potentiometer Dimming

ACCESSORIES
Standard Snoot	19mm long x ⌀16mm straight snoot
Extended Snoot	24mm long x ⌀16mm straight snoot
Directional Snoot	30mm long x ⌀16mm slash-cut snoot
Honeycomb	Honeycomb diffuser which can be fitted to any snoot option

Note that the drawings above show the standard snoot option.

Product Datasheet

ORDERING CODES	Click grey buttons to configure

Model Type

Colour Temp

Optics

Colour

Snoot

Honeycomb

Model Number:

Item	Dimming Driver
Product Code	UFO IONDR-CV-DC-12-25-D
Description	Constant voltage dimmable driver
Input Voltage Range	12 - 15V DC
Rated Power	25W
Output Current	2A
Output Voltage	12V
Max. No. of Ionic Fittings per Driver	Up to a maximum of 25W
Functionality	Potentiometer dimming
IP Rating	IP20 - internal use only
Protection	SCP, OCP, OTP
Connection	Screw terminal
Dimensions	196mm x 89.5mm x 33.5mm 7.7" x 3.5" x 1.3"

Ionic Dimming Driver

The unit is a compact 0-12V dimming driver capable of driving the Ionic track up to amaximum of 25W of Ionic fittings.

The driver enclosure has a Power On red LED and an output voltage green LED which varies its intensity depending on the output voltage/ global dimming status.

This driver is suitable for indoor use only.

Driver Datasheet

Driver User Guide

Item	Non-Dimming Interface
Product Code	UFO IONIF-CV-DC-12-XX
Description	Constant voltage interface
Input / Output Voltage	12VDC
Number of Ionic Fittings	Dependent on driver output
Connection	WAGO lever terminal
IP Rating	IP20 - internal use only
Material & Finish	ABS plastic / black
Dimensions	80mm x 40mm x 20mm 3.2" x 1.6" x 0.8"

Ionic Non-dimming Interface

The Ionic constant voltage Interface is a compact 12V unit providing a connection interface between the Ionic track and Ionic LED fittings and other proprietary 12V constant voltage dimmable drivers.

The interface enclosure has a Power On red LED and is suitable for indoor use only.

Interface Datasheet

Interface User Guide