The Vega Decorative offers amazing LED brightness for architectural lighting projects and incorporates a decorative effects wheel for colour change or twinkle effects.
With a long lamp life, and very bright white light output, the Vega fits perfectly in situations where tungsten halogen, or even metal halide options would normally be specified.
Very cool and almost silent running combined with a small unit size, make this light source suitable for use in restricted spaces, and when fitted in an IP rated enclosure it can easily be situated outside.
Fitted with a standard 30mm fibre port connector, this light source is suitable for both new installations and retro-fitting to existing fibre optic installations.
CONFIGURATIONS
Click the option buttons below to create the model number
MODEL TYPE
COLOUR TEMPERATURE
MANUAL DIM*
EFFECT
CONTROL
Model Number:
*Manual dimming is only available on light sources with manual control option. The Vega XCM(colour wheel) & Vega XTM (twinkle wheel) have manual speed control on the decorative motor. On these versions the light output is set to maximum and cannot be dimmed.
The Vega MCM & Vega MTM have manual speed control on the decorative motor and also manual dimming control of the LED. The light output can be adjusted manually using the controlon the rear of the unit from no light output to maximum light output.
Colour or twinkle controlled by 0-10V, DMX or manual operation.
For DMX operation, twinkle wheels can be supplied in full or segmented versions. The segmented option, controlled by a sensor, has a cutout to allow full light output when the twinkle effect is stopped.
LED ARRAY DATA
LED Array Type
White light
LED Array Power
18W
LED Array Model
Cree Xlamp - MT-G2
LED Array Life (L70, B10)
>36,000 hours (typical)
2700K LED Option
80CRI / 1720lm
3000K LED Option
80CRI / 1770lm
4000K LED Option
80CRI / 1820lm
ELECTRICAL CHARACTERISTICS
Supply Voltage
90-264Vac
Mains Running Current
0.23A @240Vac
Mains Voltage VA Rating
50VA
External PSU Type
Meanwell, 24VDC, 2.5A, 60W
Motor Type
Rotalink 25C13/YS0LPSL3E - 12V - 60:1
AVAILABLE ACCESSORIES
MAS0403021R5
Weatherproof enclosure
OPTIONAL WALL MOUNTING PLATE
Some installations of this light source require the use of an optional mounting plate to secure the unit in place.
To aid with the fitment of the plate we have produced a short video and a fitting guide.